Leather Machineries Division
Stenpress Bluestar Versus
New system for sammying Wet-Blue leather belly to belly.Simplify the splitting and shaving operation. Avoid folds,more area. Ideal for full-thickness hides and hides divided into pelts.
BAUCE
This machine was conceived while keeping in mind during the planning phase the following characteristics dictated by the modern tanning industry:
- Sturdiness and reliability: given by the use of high-quality materials in combination with the most advanced construction techniques
- Drying power, obtained by using a completely hydraulic system having five drying cylinders disposed in double calender and with two differential pressures which develop 80 tonnes per single pressure
- Double-calender pressing system which permits squeezing at five points
- Rapid maintenance: right from the initial planning phase, the simple replacement of all the components subject to wear, and especially the realisation of a rapid and simple felt replacement system, had been considered
- Simplicity of use: that makes it suitable for use by unskilled personnel: automation of felt centring, the movement of the spreading cylinder; the thickness of the hide and the speed of work are displayed on the control panel
New system with double setting cylinder to work the leather in:
- belly to belly mode
- butt to neck mode
- belly to belly mode for leather with hump
- side leather
| Technical data |
Bluestar Versus | |||||
| Work speed |
mt/min | 7÷23 | 7÷23 | 7÷23 | 7÷23 | 7÷23 |
| Installed power |
Kw | 36/39 | 36/39 | 36/39 | 36/39 | 36/39 |
| Hydraulic pump pressure |
bar | 50÷200 | 50÷200 | 50÷200 | 50÷200 | 50÷200 |
| Max pressure on the top felt | Kg | 1a coppia 80.000 | 2a coppia 80.000 | |||
| N | 1a coppia 800.000 | 2a coppia 800.000 | ||||
| Quantity of oil in the hydraulic circuit |
Kg | 200 | 200 | 200 | 200 | 200 |
| Power supply |
vedere dati di targa della macchina | |||||
| Pneumatic supply |
bar | 6 | 6 | 6 | 6 | 6 |
| Nominal air consumption |
lt/h | 200 | 200 | 200 | 200 | 200 |
| Water supply |
bar | 2 | 2 | 2 | 2 | 2 |
| Water consumption |
m3/h | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 |
| Dimensions | Bluestar Versus | |||||
| Working width |
mm | 2.400 | 2.700 | 3.000 | 3.200 | 3.400 |
| Depth A | mm | 4.400 | 4.400 | 4.400 | 4.400 | 4.400 |
| Height B | mm | 2.800 | 2.800 | 2.800 | 2.800 | 2.800 |
| Width C | mm | 4.250 | 4.520 | 4.820 | 5.020 | 5.220 |
| Total net weight |
Kg | 19.190 | 20.330 | 21.470 | 22.230 | 22.850 |
| N | 191.900 | 203.300 | 214.700 | 222.300 | 228.500 | |
| Total crated gross weight |
Kg | 19.300 | 20.450 | 21.600 | 22.360 | 23.000 |
| N | 193.000 | 204.500 | 216.000 | 223.600 | 230.000 | |
| Volume width sea packing |
m3 | 34.8 | 37.2 | 39.7 | 41.4 | 43.1 |
 |
||||||
